There is 0 item in your cart.
Total products: ₹0
Total: ₹0 (tax excl.)
Pay With UPI/Bank Transfer and get 2% discount.
Specification | |
Weight | 2 kg |
BRANDS | GIGABYTE |
CPU | LGA1700 socket: Support for 12th Generation Intel® Core™ i9 processors/Intel® Core™ i7 processors/Intel® Core™ i5 processors |
L3 cache varies with CPU | |
(Please refer to “CPU Support List” for more information.) | |
Chipset | Intel® Z690 Express Chipset |
Memory | Support for DDR5 6600(O.C.) / 6400(O.C.) / 6200(O.C.) / 6000(O.C.) / 5800(O.C.) / 5600(O.C.) / 5400(O.C.) / 5200(O.C.) / 4800 / 4000 MHz memory modules |
4 x DDR5 DIMM sockets supporting up to 128 GB (32 GB single DIMM capacity) of system memory | |
Dual channel memory architecture | |
Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules (operate in non-ECC mode) | |
Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules | |
Support for Extreme Memory Profile (XMP) memory modules | |
(Please refer “Memory Support List” for more information.) | |
Onboard Graphics | Integrated Graphics Processor+Intel® Thunderbolt™ 4 Controller: |
2 x Intel® Thunderbolt™ 4 connectors (USB Type-C® ports), supporting DisplayPort and Thunderbolt™ video outputs and a maximum resolution of 5120×2880@60 Hz with 24 bpp (via single display output) | |
* Because of the limited I/O resources of the PC architecture, the number of Thunderbolt™ devices that can be used is dependent on the number of the PCI Express devices being installed. (Refer to Chapter 2-7, “Back Panel Connectors,” for more information.) | |
* Support for DisplayPort 1.4 version and HDCP 2.3 | |
(Graphics specifications may vary depending on CPU support.) | |
Audio | 1 ESS ES9280AC DAC chip + 2 ESS ES9080 chips |
DTS® Sound Unbound™ | |
High Definition Audio | |
2-channel | |
Support for S/PDIF Out | |
* The line out jack and the optical S/PDIF out connector can only be used one at a time. | |
LAN | Marvell® AQtion AQC113C 10GbE LAN chip |
(10 Gbps/5 Gbps/2.5 Gbps/1 Gbps/100 Mbps) (LAN1) | |
Intel® 2.5GbE LAN chip (2.5 Gbps/1 Gbps/100 Mbps) (LAN2) | |
Wireless Communication module | Intel® Wi-Fi 6E AX210 |
WIFI a, b, g, n, ac, ax, supporting 2.4/5/6 GHz carrier frequency bands | |
BLUETOOTH 5.2 | |
Support for 11ax 160MHz wireless standard and up to 2.4 Gbps data rate | |
* Actual data rate may vary depending on environment and equipment. | |
Expansion Slots | 1 x PCI Express x16 slot, running at x16 (PCIEX16) |
* For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16 slot. | |
1 x PCI Express x16 slot, running at x8 (PCIEX8) | |
* The PCIEX8 slot shares bandwidth with the PCIEX16 slot. When the PCIEX8 slot is populated, the PCIEX16 slot operates at up to x8 mode. | |
(The PCIEX16 and PCIEX8 slots conform to PCI Express 5.0 standard.) | |
1 x PCI Express x16 slot, running at x4 (PCIEX4_1) | |
(The PCIEX4_1 slot conforms to PCI Express 3.0 standard.) | |
Multi-Graphics Technology | Support for AMD Quad-GPU CrossFire™ and 2-Way AMD CrossFire™ technologies |
Storage Interface | CPU: |
1 x M.2 connector (Socket 3, M key, type 2260/2280/22110 PCIe 4.0 x4/x2 SSD support) (M2A_CPU) | |
Chipset: | |
2 x M.2 connectors (Socket 3, M key, type 2260/2280/22110 PCIe 4.0 x4/x2 SSD support) (M2P_SB, M2Q_SB) | |
1 x M.2 connector (Socket 3, M key, type 2260/2280/22110 SATA and PCIe 4.0 x4/x2 SSD support) (M2M_SB) | |
4 x SATA 6Gb/s connectors | |
Support for RAID 0, RAID 1, RAID 5, and RAID 10 | |
Intel® Optane™ Memory Ready | |
* System acceleration with Intel® Optane™ Memory can only be enabled on the M.2 connectors supported by the Chipset. | |
USB | Chipset+Intel® Thunderbolt™ 4 Controller: |
2 x USB Type-C® ports on the back panel, with USB 3.2 Gen 2 support | |
Chipset: | |
1 x USB Type-C® port with USB 3.2 Gen 2×2 support, available through the internal USB header | |
6 x USB 3.2 Gen 2 Type-A ports (red) on the back panel | |
Chipset+USB 3.2 Gen 2 Hub: | |
4 x USB 3.2 Gen 2 Type-A ports (red) on the back panel | |
Chipset+USB 3.2 Gen 1 Hub: | |
4 x USB 3.2 Gen 1 ports available through the internal USB headers | |
Chipset+USB 2.0 Hub: | |
4 x USB 2.0/1.1 ports available through the internal USB header (with the included front USB header extension cable) | |
Internal I/O Connectors | 1 x 24-pin ATX main power connector |
2 x 8-pin ATX 12V power connectors | |
1 x CPU fan header | |
1 x water cooling CPU fan header | |
4 x system fan headers | |
4 x system fan/water cooling pump headers | |
1 x noise detection header | |
1 x AORUS RGB Memory Armor power header | |
2 x addressable LED strip + RGB LED strip combo extension cable headers | |
4 x SATA 6Gb/s connectors | |
4 x M.2 Socket 3 connectors | |
1 x front panel header | |
1 x USB Type-C® header, with USB 3.2 Gen 2×2 support | |
2 x USB 3.2 Gen 1 headers | |
1 x USB 2.0/1.1 header | |
2 x temperature sensor headers | |
1 x power button | |
1 x reset button | |
Back Panel Connectors | 1 x Q-Flash Plus button |
1 x OC Ignition button | |
1 x Clear CMOS button | |
2 x SMA antenna connectors (2T2R) | |
2 x Thunderbolt™ 4 connectors (USB Type-C® port, with USB 3.2 Gen 2 support) | |
10 x USB 3.2 Gen 2 Type-A ports (red) | |
2 x RJ-45 ports | |
1 x optical S/PDIF Out connector | |
2 x audio jacks | |
* The mic in jack supports only mono microphone input. | |
I/O Controller | iTE® I/O Controller Chip |
H/W Monitoring | Voltage detection |
Temperature detection | |
Fan speed detection | |
Water cooling flow rate detection | |
Fan fail warning | |
Fan speed control | |
* Whether the fan (pump) speed control function is supported will depend on the fan (pump) you install. | |
Noise detection | |
BIOS | 1 x 256 Mbit flash |
Use of licensed AMI UEFI BIOS | |
PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0 | |
Unique Features | Support for APP Center |
* Available applications in APP Center may vary by motherboard model. Supported functions of each application may also vary depending on motherboard specifications. | |
@BIOS | |
EasyTune | |
Fast Boot |